当前时间:
服务热线:186-111-3043
设为首页 /加入收藏

公司资讯

当前位置:首页 > 公司资讯

环氧地坪助剂的使用包括哪些项目?

 环氧地坪使用助剂那就是很常见的问题,其中助剂就相当于催化剂,使用得当那就会产生难以估计的作用,一旦就是使用不好的话,那就会是相反作用了:

Epoxy floor use fertilizer that is very common problems, including assistant is equivalent to the catalyst, properly used there could be difficult to estimate the effect, once is to use the bad words, that would be the opposite effect:

 

1 )分散剂地坪漆,填充内容,教学量是比较高的,分散的时候,分散,效率低,且易产生浮色,模糊现象,应加入改善润湿分散剂的常用方法。乙醇酸酯分散剂理想的润湿性,较低的教育,分散,防浮色,防模糊效果,同时也提高了涂膜光泽,促进流平性防止涂料沉淀效果。

1) dispersant floor paint, filler content, the teaching quantity is relatively high, dispersion, dispersion, low efficiency, and easy to produce floating color, fuzzy phenomenon, should join the commonly used method to improve wetting dispersants. The ideal wettability of ethyl glycolate dispersant, lower education, dispersion, anti - float, anti - blur effect, as well as improve the film gloss, promote the leveling of the flow and prevent the effect of coating deposition.

2 )耐磨环氧自流平地坪涂料剂,由于少无溶剂环氧地坪漆耐磨的溶剂含量和不含挥发性溶剂,油漆教高的表面张力,穷人的建设后润湿基材,练级差,易发生剥离涂层,刷痕,波纹,火山口等表面针子状态的缺陷。因此,受流平剂添加,减少涂料的表面张力,延长时间的流动,改善流平性能。

2) the abrasion resistance of epoxy self-leveling floor coating agent, due to less solvent-free epoxy floor paint wear and do not contain volatile solvent, the solvent content of paint to teach high surface tension, wetting base material, after the construction of the poor leveling is poor, prone to peeling coating, brush marks, corrugated, needle sub-state crater, such as surface defects. Therefore, the surface tension of the coating can be reduced by the addition of the fluidity agent, and the flow of time can be extended to improve the fluidity performance.

 

3)消泡剂含有多种耐磨材料用的表面活性,容易起泡环氧地板涂料;水泥砂浆基材,有许多毛孔,毛孔会被空气中留出的薄膜涂料的更换;建筑用机械搅拌和刮板在表面涂层使大量空气进入膜;而他们的油漆粘度,稳定的气泡在影片中,不易排出,这些因素使涂料应加入加速气体放电消泡剂,降低针的儿子,鱼眼等缺陷。

3) the foaming agent has the surface activity of a variety of wear-resisting materials, easy foaming epoxy floor coating; Cement mortar base material, there are many pores, pores will be replaced by the thin film coating in the air; The mechanical stirring and scraping plates of the building are coated with a large amount of air into the membrane. And their paint viscosity, stable air bubbles in the film, not easy to discharge, these factors make the coating should be added to the accelerated gas discharge defoaming agent, the son of the needle, fisheye and other defects.